What is ThermoSeal 5G?
ThermoSeal 5G is a Next Generation two component, semi-rigid, medium density, 1.7 lb closed cell polyurethane foam insulation system which simultaneously insulates and air-seals your building structure. Thermoseal 5G uses the latest generation, high performance blowing agent known as Solstice LBA developed by Honeywell. Sostice LBA has a Global Warming Potential “GWP” up to 99.9% of the products they replace. Thermoseal 5G requires the use of an “ “ component (ISO) and a blended “B” component (RESIN), which contains ZERO ozone depleting catalysts, polyols and re retarding materials.Thermo- Seal 5G is designed to make homes more energy efficient, quieter, healthier and more comfortable. ThermoSeal 5G is applied as a liquid spray which expands approximately 15 times its initial mass and cures within seconds into a semi-rigid mass. ThermoSeal 5G fills all building cavities completely sealing all cracks, crevices, and voids where air loss and inltration are most common.
Contractor & Applicator Benefits
With continuous research and development, ThermoSeal continues to lead the spray foam insulation industry in both quality and diversity of spray foam products. Our products insulation performance is the clear winner in energy savings, sound control, moisture vapor permeance, lifespan, and cellular structure, therefore reducing waste and cost at the same time.
|Class 1 Pass
|ASTM E 84
|Complies with the applicable requirements of ICC-ES AC377 Appendix X for use in attics and crawlspaces without a prescriptive ignition barrier.
|ICC-ES AC377 Appendix X
|Pass using DC315 manufactured by International Fireproof Technology, Inc at (88.88 sq. ft./gal @ 18 mils wet and 12 mils dry) coverage rate of 1.136 gallons (4.3 L) per 100 square feet (9.3 m2)